JASO D611 STANDARD PDF

Automotive Cables to ISO, SAEJ, JASO D Automotive Cables. APPLICATIONS OVERVIEW. Standard wall automotive cables are ideal for use in. AVSS Automotive Wire JASO D Construction (No./mm), calculated area ( mm2), Outer Diameter (mm), Standard (mm), Min. (mm), Standard (mm), Max. AVSS Japanese Standard Automotive Cable Conductor:Cu-ETP1 bare according to JIS Insulation:PVC Standard Compliance:JASO D

Author: Datilar Zulurg
Country: Gabon
Language: English (Spanish)
Genre: History
Published (Last): 6 December 2007
Pages: 293
PDF File Size: 19.30 Mb
ePub File Size: 6.58 Mb
ISBN: 940-9-79865-426-1
Downloads: 38010
Price: Free* [*Free Regsitration Required]
Uploader: Zulumi

In addition, the performance with different nominal sizes shall be as specified in Tables 8 to Outline and background of revision 1. Minimum volume resistivity shall be ? Packaging Products shall be packaged either on a reel or in bundle, and such that they are not easily damaged during transportation. Scope This standard specifies low-voltage cables hereinafter referred to as “cables” used as unscreened single-core low-voltage cables for automobiles, excluding AV low-voltage cables for automobiles specified in JIS C The conductor shall not be exposed after the test.

Initially, the international standard ISO for automotive cables also contained no specifications about rated voltage, but in the revision innew rated voltage classes of 60 V and V were provided and their voltage resistance requirements were clearly specified considering the development of new 42 V automotive electric system and the expanding trend of electric vehicles.

Extremely thin wall halogen-free insulated low-voltage cables for automobiles CHFS: Details of specified items in specified elements 5. The insulation shall not be fractured in the specified test. Among the heat resistance tests of the ISO standard, the short-term test and overload test were not adopted. Thin wall low-voltage cables “type 1” stsndard automobiles 0.

title – Automotive Cables to ISO, SAEJ, JASO D

Thin wall low-voltage cables for automobiles, type 2 HFSS: Conductor Calculated Nominal Number of Approx. Especially for the short-term aging test, heat load test, and heat resistance test that are under revision deliberation in ISOit is important to insist on the Japanese position to facilitate standard conformance. Halogen-free insulated low-voltage cables staneard automobiles AVS: To check the rated voltage, refer to the “name or symbol and nominal size” indicated on the cable, cable frame, or bundle.

  ANEUPLOIDIA Y POLIPLOIDIA PDF

Matters related to patent rights This standard includes no matters related to patent rights. Therefore, the horizontal burning test in the JASO standard was adopted. When the rate of outside diameter changer is measured after the specified test and subsequently stqndard winding test in 6. Scope All previous automotive low-voltage cable standards JIS C established inwhich was the first standard for this subject in Japan, JASO D established in in which the insulation covering was made thinner, and D established in were created without concern about the rated voltage of the cables because the cables were applied to automotive electric systems with the international standard of 12 V and 24 V, and have been used continuously.

All matters such as the testing method and testing jig shall be handled as common knowledge.

China UL, Jaso D Standards AVS Type Automotive Wire – China PVC Jacket, Automotive Wire

In addition, this standard also applies to individual cores comprising a multi-core cable. Maximum shrinkage length on the both ends shall be 2 mm after being heated as specified. The conductor shall not be exposed in the winding test in 6. The heat resistance A test shall be conducted in accordance with the method specified in 5.

The insulation shall not be fractured d61 the specified voltage is applied. For this reason, the current details are applied unchanged. However, since cables are actually handled with these multiple symbols, serial indication of multiple symbols was adopted to avoid confusion.

Automotive Cables to ISO6722, SAEJ1128, JASO D611

The burning cable shall self extinguish within 30 seconds after exposure to naked jasl. Minimum abrasion resistance shall be as specified in Table 9. However, gasoline, diesel fuel, and engine oil must be always tested.

  EVERMOTION ARCHMODELS VOL 109 PDF

Compressed conductor extremely thin wall halogen-free insulated low-voltage cables for automobiles CAVUS: Normative reference The following standards, when referred to in this standard, constitute a part of the specifications of this standard. As required, the most recently updated version of the applicable standard including addenda shall be applied.

The burning cable shall self extinguish within 15 seconds after exposure to naked flame. Therefore, all materials are described in Table 1. In addition, the necessity and method of voltage indication must be discussed to establish its future direction. The heat resistance C test shall be conducted in accordance with the method specified in 5.

The identification mark shall be readable after the specified test. Therefore, in this revision, standards for rated voltage of 25 VAC and 60 VDC are provided mainly for cables with thin insulation covering specified by JASO according to the international standard.

This test is applicable to the nominal sizes of 5 or less. For other fuels, the test shall be performed upon an agreement between the parties involved in delivery.

Therefore, no wire diameter is specified in the construction table and only “circular compression” is described. The types and symbols are summarized and described in Table 1. Compressed conductor ultra thin wall halogen-free insulated low-voltage cables for automobiles EB: The winding test shall be conducted in accordance with the method specified in 5.

Cross-linked vinyl insulated heat resistant earth bond low-voltage cables for automobiles AEX: The scrape stzndard test shall be conducted in accordance with the method specified in 5.